Die Setter

Reports To:      Supervisor-Team Leader

Department:    Production

Location:         Deerfield Manufacturing, Mason Ohio location.

General Function: Removal and set up of stamping dies in a safe and timely manner.

 

Job Duties:

• Adjusting dies to obtain an acceptable product through quality control.
• Write tool repair tags and communicate with die storage for tool and die transit to die shop.
• Communicate all issue with machine, tools and set-ups working towards continuous improvement.
• Set all safety devices and provide a thorough check of each safety device before turning the press over to production.
• Informing each press operator on their particular die/dies, instruct them on safe operation.
• Complete all parameters on all set-ups and create new parameters on new jobs.
• Make proper changeovers on dies and to obtain and return changeover parts to and from assigned destinations.
• Trouble shoot and assist in trouble shooting with die makers when necessary.
• Safety conscious to include proper use of P.P.E.
• Lubricate dies on a daily basis. This includes draw pins, guide post, bushings, cam drivers, etc. Also keep the proper mixture of oil at each die that requires it for operators use.
• Relieve operators on emergency basis, when necessary.
• Polish dies due to galling, when needed.
• Maintain bolt carts, bolsters on presses, racks and cabinets in a clean and orderly fashion.
• Must be willing to work any and all overtime as required

All other duties as assigned by management

Working Conditions: Plant environment, working on and around machinery. Moving and setting large Stamping dies up to 50K lbs.

Physical Component(s): Standing 7.7 hours, capable of lifting from 10lbs - 40 lbs on a consistent basis to include; pushing, pulling, bending, some stooping and reaching. Using manual tools and compressed air impact guns.

Education/Experience: Experience in set up and operation of large stamping press. Must be capable of learning to trouble shoot issues with stamping die and press.

Other Requirements:
Set-up and tune in dies without help from team lead.
Good communication skills, capable of completing required paperwork.
Capable of being trained in Lock-out/Tag-out, crane and die-setting.
Capable of driving a tow motor/die cart in order to obtain a license.
Excellent attendance.

http://www.iceindustries.com/en/manufacturing/careers/

Fill out an application for the Die Setter position at our Mason, OH Facility.